Homepage » Shop » Home care products » Nano coating for cooktops, heating plates

Nano coating for cooktops, heating plates

Rated 5.00 out of 5 based on 4 customer ratings

Nano coating and nano cleaner, dedicated for protecting heating plates, cooktops from negative environmental conditions (30/30 ml)

16.99 €

Loyalty program & discounts. By buying this product You would get 16.99 loyalty points. Your whole cart would be worth 16.99 loyalty points, which You could later exchange into 0.85 € discount for future orders.

About this product

This product is developed based on the latest technology advancements in the chemical industry. Using a specially developed formula, the surface is covered with strong silane nano particles, which prevent the accumulation of burn deposits and soot on the surface. Surfaces covered with this product become extremely easy to clean – to clean the soot and burn deposits, only a damp cotton cloth and a simple degreasing cleaner is enough. Aggressive chemicals are simply unnecessary.

Product features:

• Creates strong hydrophobic and oleophobic properties.
• Coats the surface with invisible film of nano particles, allowing easier maintenance and cleaning.
• Soot, burn deposits can be easily cleaned using a damp microfiber cloth.

1

Makes cleaning process much easier

2

Works great on induction, ceramic heating plates

3

Enough for 5 coating cycles

4

One coating is enough for 6 months

Nano coating for cooktops and heating plates 1

Nano coating for cooktops and heating plates 2

Nano coating for cooktops and heating plates 3

Product information

Application conditions

Product must not be used at temperatures of 5° C and below. Do not use when average humidity in the premises is high (50% or more), because this will reduce coating’s efficiency and longevity.

Important

Coated surface must not be touched, must be protected from water and rain for minimum period of 2 hours after coating process. The effect of easy-to-clean surface appears after 2 hours, but we recommend leaving the coated surface to cure for 12 hours. For re-application, apply as you did the first time, follow the same instructions. If the nano-coated surface loses its hydrophobic properties, wipe with a clean damp cotton cloth and a degreasing cleaner, then the hydrophobic properties will be restored. Avoid direct sun light and high levels of humidity during coating process.