This coating is dedicated for protection of plastic, polymer, acrylic, plexiglass surfaces. Coating will help to reduce the deposition of oil, grease (which builds up after tap water dries out.) Surface becomes hydrophobic. After applying this coating, you will not only reduce the accumulation of sediments, but also make cleaning easier – surfaces, covered with this product, have strong repellency properties, so it helps to clean not only grease, but also lime scale (without using aggressive chemicals that can damage plastic surfaces).
Product usage:
Before using this nano coating kit, make sure that the surface you intend to coat is completely dry, fully clean and free of any oil or grease. If there is a deposit of insects, dirt, mud or grime on the surface, remove it thoroughly using conventional cleaners.
I. STEP – DEGREASING
1. Open the left side of the aluminum bag, and take the cloth.
2. By using the cloth, thorouhgly clean (degrease) the surface.
3. Wait for 30-60 seconds, until suface completely dries out.
II. STEP – COATING PROCESS
1. Open the right side of aluminum bag, and remove the cloth.
2. By using vertical, overlapping strokes, thoroughly polish the surface using the cloth, clean the surface as long as the cloth is damp.
3. After the coating cloth becomes dry, take a dry paper towel and thoroughly polish the surface.
Product volume:
cloth soaked with 10ml of cleaner and cloth soaked with 10ml nano coating
Product efficiency:
8-12 ml/m2
Attention:
The surface must be dry, untouched, protected from dirt for at least 2 hours (10-12 hour period is recommended). In order to clean the coated surface, we recommend using dampened microfiber cloths. If product gets in eyes or mouth, wash with large amounts of clean water.
Storage conditions:
keep from +5 to +25 degrees Celsius, keep out of reach of children.
Reviews
There are no reviews yet.