USER INSTRUCTIONS
Before using this product, please make sure that the surface You’re about to coat is completely clean, dry and free of grease/oils. If the surface is soiled with insect leftovers, dirt, mud or grime deposits – thoroughly remove them using standard glass cleaner. Make sure that the surface is not hot, does not exceed room temperature. Product contains skin dehumidifying components, we recommend wearing gloves.
I. STEP – DEGREASING
1. Open the left side of the aluminum bag, and take the cloth.
2. By using the cloth, thorouhgly clean (degrease) the surface.
3. Wait for 30-60 seconds, until suface completely dries out.
II. STEP – COATING PROCESS
1. Open the right side of aluminum bag, and remove the cloth.
2. Using even, overlapping vertical motions, carefully and gently polish the entire surface you want to cover – clean until the wipe is damp.
3. After the coating cloth becomes dry, take a dry paper towel and thoroughly polish the surface.
Product volume: 12 ml cleaner and 12 ml nano coating
Išeiga: 8-12 ml/m2
Attention: for at least 2 hours (recomm. 10-12 hours), the surface must be dry, clean, untouched, protected from dirt. For surface maintenance You can use any type of glass cleaner (avoid glass cleaners that contain glycerol). If product gets in eyes or mouth, wash with large amounts of clean water.
Storage: keep at +5 – +25 temperature, keep out of reach of children.
Reviews
There are no reviews yet.