Homepage » Shop » Nano coating for porous mineral surfaces WP-30

Nano coating for porous mineral surfaces WP-30

A long-lasting nano coating, specially created for the surfaces of buildings and pavements is designed to protect porous, high-absorbing surfaces from negative environmental conditions, also meant to maintain an aesthetic appearance for longer.

14.99 €

Loyalty program & discounts. By buying this product You would get 14.99 loyalty points. Your whole cart would be worth 14.99 loyalty points, which You could later exchange into 0.75 € discount for future orders.

About this product

Water-based nano coating, created for protection of porous mineral facades and mineral surfaces. The product provides hydrophobic properties to the coated surface and helps maintain aesthetic beauty and functionality. The surfaces mentioned above are usually difficult to clean, they are often covered with various soot, dust, and oil products. But after these surfaces are coated with WP-30, all sediments and dirt deposits can be removed without big hassle. The impregnated surface does not absorb moisture, becomes more resistant to corrosion/erosion and prevents the reproduction of microorganisms or spore plants.

Suitable for

Sandstone, limestone, bricks, concrete, gypsum, plaster, slate

Method of application

Sprayer, pulverizer, brush, roller

Product efficiency

80-150 ml/ m²

1

Prevents water/rain from soaking in, but keeps the building "breathability" intact

2

Surface does not become sticky

3

Keeps original colour and looks

4

Has no "wet effect"

5

Prevents the absorption of dirt and sediments, the surface will be much easier to clean

6

Prevents growing of spore plants (mold, lichen etc.)

Product information

Application instructions

Before applying the coating, make sure that surface is completely dry, clean and degreased;
Cover the surface evenly using a sprayer/paint roller/brush, leaving no dry areas or spots;
Apply the coating until the surface does not absorb it anymore;
Allow the surface to dry completely – after the surface has dried, do not allow it to get wet for at least 6-12 hours after application.

Additional information

Dilution: Product is ready to use – do not dilute!

Application temperature: from +5 °C to +30 °C.

Storage conditions: from 5° C and above.

Product efficiency: 80-120 ml/m²

Longevity of applied coating:

Approx. 24 months – pavements, brick or tile roads, and other horizontal mineral surfaces;
Approx. 5 years – vertical mineral surfaces (walls, fence constructions etc.)