Homepage » Shop » Nano coating for porous mineral surfaces WP-30

Nano coating for porous mineral surfaces WP-30

This product is specifically designed to coat porous, highly water-absorbant surfaces.

59.99 €

Loyalty program & discounts. By buying this product You would get 59.99 loyalty points. Your whole cart would be worth 59.99 loyalty points, which You could later exchange into 3 € discount for future orders.

About this product

Product is water-based, hence very pleasant and easy to work with. Thanks to the silanes, active particles in the formula, the coating is deeply absorbed and evenly distributed throughout the coated surface. The surface treated with this product will acquire strong hydrophobic properties without changing its appearance, air permeability and other physical properties – but it will become much more resistant to negative environmental factors (corrosion, thermo-shocks, etc.), dirt, corrosive substances (sulphur, chlorine compounds and salts) The product keeps surfaces clean for much longer due to the hydrophobic effect, that repels water and mud, salts, acids and other corrosive substances and prevents them from entering the structure of the material. This product also protects the material during washing or cleaning processes.

Volume: 5 liters

1

Prevents water/rain from soaking in, but keeps the building "breathability" intact

2

Surface does not become sticky

3

Keeps original colour and looks

4

Has no "wet effect"

5

Prevents the absorption of dirt and sediments, the surface will be much easier to clean

6

Prevents the reproduction of spore plants (mold, lichen etc.)

Product information

Suitable for

Sandstone, limestone, bricks, concrete, gypsum, plaster, slate

Method of application

Sprayer, pulverizer, brush, roller

Application instructions

Before applying the coating, make sure that surface is completely dry, clean and degreased;
Cover the surface evenly using a sprayer/paint roller/brush, leaving no dry areas or spots;
Apply the coating until the surface does not absorb it anymore;
Allow the surface to dry completely – after the surface has dried, do not allow it to get wet for at least 6-12 hours after application.

Additional information

Dilution: Product is ready to use – do not dilute!

Application temperature: from +5 °C to +30 °C.

Storage conditions: from 5° C and above.

Product efficiency: 80-120 ml/m²

Longevity of applied coating:

Approx. 24 months – pavements, brick or tile roads, and other horizontal mineral surfaces;
Approx. 5 years – vertical mineral surfaces (walls, fence constructions etc.)