CERAMIC ARMOR COAT™ is an ultimate paint protection system against all negative environmental effects. Its unique technology helps achieve a thick coating, which protects Your car from bird droppings, acid rains, UV lights. Surfaces, coated with CERAMIC ARMOR COAT™ will also inherit highly hydrophobic surface properties, which will enable You to clean Your car easily and with less time and energy. Your car will stay more clean and shiny when coated with CERAMIC ARMOR COAT™.
AREAS OF APPLICATION: Cars, boats and any other type of transport vehicles (Trains, aircraft, motorcycles etc.), with painted surfaces, lacquered body and lights (headlights, taillights, fog lights etc.), black plastic trim surfaces. Coating is not suitable for chrome, painted plastic parts without lacquer. Freshly painted parts can be coated, but no earlier than after 2 months of painting. This product is applicable to all lacquered painted plastic surfaces.
APPLICATION INSTRUCTIONS (Read before starting the coating process):
Prepare the surface properly prior coating. It is advised to fully wash the car, apply clay bar, polish with appropriate and required cutting compounds and machines, use silicon-removing cleaners, wash car again and dry the car until it’s fully dry. Ensure that there’s no risk of water dripping onto partly cured coating. It is recommended to use a strong air stream to blow any excess water from trim areas. If water does drip onto partially cured coating, we recommend re-polishing the affected area and reapplying the CERAMIC ARMOR COAT™. Surface, prepared for application, must be dry and free of any dirt, water and detergent residues.
Approx. consumption guide for cars:
Small automobiles (class A-B) 25-30 ml/car
Medium automobiles (class C-D) 30-35 ml/car
Large automobiles (class E, SUV) 35-40 ml/car
Technical charasteristics and data:
|Product volume||40 ml|
|Areas of use||Automobiles, motorcycles, yachts|
12 months / 50 carwashes (-40 °C to +40 °C; ph > 12) during harsh conditions;
36 months / 150 carwashes (-20 °C to +35 °C; ph < 12) during normal conditions;
|Temperature resistance||up to 150 °C|
|Product efficiency||4-5 ml/m2|
|Thickness of the coating||700-1000 nm|
|Scratch durability||9H ("pencil test")|
|Shelf life||12 months|
| Storage conditions||-3 °C to +30 °C, keep away from children|
6 hours after coating process surface must be protected from water, low temperatures and dirt;
after 48 hours period coating fully cures and hardness test can be applied